English
Deutsch
Französisch
Series HREPPF – PREMIUM SF -
Advantages at a glance:
• Automatic setting of the limit positions
With the push of a button the motor looks out for both of the limit positions and automatically saves them.
Additionally the limit positions can also be set manually according to your individual requirements.
• Automatic calibration of the limit positions
After 120 cycles - Up/Down movements – the tubular motor eliminates its limit positions and resets them.
Due to this function an exact upper limit of the rail is guaranteed.
(This function can be deactivated by using the manual limit setting.)
• Adjustment of the upper limit into 10°, 20° or 30°
As a standard setting, the motor releases the upper limit position at 20° and is saved to protect your roller shutter from
unnecessary wear and tear. (this setting can be adjusted to 10° or 30°, the standard setting is 20°)
• Automatic obstacle detection with bounce back function
The motor recognizes obstacles in the downward movement, stopps and releases the obstacle by bouncing back.
This feature protects the roller shutter, the motor and the obstacle. (The obstacle detection and/or bounce back function can be
deactivated)
• Automatic anti-freezing function with bounce back function
The motor recognizes a blockage in the upward movement, e.g. when the roller shutter is frozen. Therefore the motor stops, moves back
down and releases the hanging.
• Automatic direction detection
After the motor has detected and saved its limit positions, the assignment on the emitter is automatically set correct
• FP/FS/ST-Types with plug connection: For the quick and simple connection of the motor as well as when removing or
exchanging without cutting through the supply line
• 5 year warranty on faultless performance
Technical data is available on www.heicko.de.
Due to a diameter of 35 or 45 mm, the motor is suitable for 40’s, 60’s and 70’s octagonal shafts as well as for various round shafts. The improved clippable motor head ensures a simple and speedy assembly. In case of a wrong direction of rotation the direction the motor with built-in receiver recognizes the right direction and switches the assignment on the emitter itself. The obstacle detection function stops the downward movement if an obstacle had been recognized by the motor e.g . child toys that are lying on the floor, furniture for the garden or plants. The motor stopps immediately and uses its bounce back function to protect the hanging as well as the obstacle. The anti-freezing protection function reacts, if during the upwards movement, the rollers encounter a strong opposing force e.g. if they freeze on the window sill. This in turn prevents damage to the roller shutters and the motor.
Setting of the limit positions is completely automatic during the start-up procedure and the limits readjust after every 120 cycles. Since the hangings are exposed to large temperature fluctuations, this is an important feature. The limit positions need to be readjusted, which is electronically controlled by the motor. The upper limit can be set in 10° steps, to avoid tension on the hanging and ensure the adjustment for your individual requirements.
Many functions can be set via emitter and manually via the external push button (additional cable on the motors head, 25 cm long) or our setting cable item no. HR130020 and can partly be disabled. The control is possible via emitter or also via app in combination with a suitable gateway, e.g. the e-Smart Home gateway by Broadlink as well as the everHome Cloudbox.
Note:
Shaft connector or anti-lift locks are recommended for the obstacle detection function. Our shaft connectors also have a burglar-resistant effect, as the hanging can not be pushed up. Stopper or angled rails are needed for the automatically adjustable limits. The obstacle
detection function is not advisable for small windows or when multiple shutters are being utilised (the obstacle detection function can be deactivated).
Scope of supply:
• Electronic tubular motor
• Pre-assembled adapter-kit for octagonal shaft
• Adapter-kit for round-shaft 54 mm (only*FP/*FS models)
• Adapter for retrofitting from a clippable motor head into a square shaft reception
• German manual and assembly instructions
(other languages on request)
Adjustment of the upper limit position
With the automatic adjustment of the limit positions the standard setting is 20°. You can adjust the upper limit position to 10°or 30° so that the hanging is never exposed to tension and can be adapted to your individual needs.
Suitable brackets for heicko tubular motors with clippable motor head are available in the category "Motor brackets"